Recommended Courses

Core Requirements		Contact Hours	Credit Hours
CNST-103	Introductory Craft Skill	90	3
CNST-118	Safety Orientation (OSHA 10)	15	1
CNST-112	Carpentry Basics	105	4
CNST-116	Blueprints and Building Codes	105	4
CNST-190	Survey and Elevations	90	3
CNST-210	Drywall, Insulation & Ventilation	105	4
CNST-230	Exterior Construction	140	5
CNST-126	Floors, Walls & Ceiling Framing	105	4
CNST-136	Roof Framing	90	3
CNST-151	Windows, Doors & Stairs	90	3
CNST-107	Shop Math & Communications I	50	2
CNST-159	Painting, Finishing & Interior Design	105	4
CNST-180	Interior Construction	105	4
CNST-221	Cabinet Installation & Fabrication	105	4
Total		1300	48
CNST-207	On-the-Job Training (OJT or OJT Equivalent)	150	3
Total Contact Hours		1450	51

Associate in Applied Science Degree

Students completing a technical program may desire to seek the Associate in Applied Sciences Degree.  In addition to completing a technical program, this degree also requires the completion of 18 hours in general education.  Certain courses within this degree may or may not transfer to baccalaureate degree granting institutions. The student must complete 64 semester hours with a grade point average of 2.00 (C) or above.

Course Descriptions

CNST-103. Introductory Craft Skill. 3 Hours (90 Contact Hours). This is a required course for all students entering the Building Trades Program. The intent of this course is to introduce the students to the construction trades. It is very important for every student to learn the proper way to conduct themselves while in the shop or on the job site. This course will cover shop safety, (Shop and Job Site), tool safety (Hand and Power tools), personal protective devices, protective railings, proper storage and handling of construction materials, construction drawings, basic math skills, basic communication and employability skills.

CNST-118. Safety Orientation (OSHA 10). 1 Hours (15 Contact Hours). Students will learn basic OSHA regulations and safety. The students will also learn how to read the OSHA manual properly. This course will stress the importance of PPE, fall protection and hazards, along with other topics.

CNST-112. Carpentry Basics. 4 Hours (105 Contact Hours). The intent of this course is to teach the students history of the construction trade, building materials, hand and power tools and reading plans and elevations. It also describes the apprentice program and career opportunities, different fasteners and adhesives.

CNST-107. Shop Math and Communications I. 2 Hours (50 Contact Hours). Basic technical math and work ethics are taught utilizing various sources. The math skills applicable to checking accounts, gross earnings, payroll deductions, employee compensations and personal finance are covered. Prerequisite: COMPASS testing.

CNST-116. Blueprints and Building Codes. 4 Hours (105 Contact Hours). This course identifies the importance of accurately reading blueprints and integrates current building codes and zoning ordinances in building construction. Students are instructed in building layout and use variety of measuring, leveling, and lay out of tools.

CNST-126. Floors, Walls & Ceiling Framing Construction. 4 Hours (105 Contact Hours). This course will cover laying out and erecting floor, wall and ceiling sections. The emphasis for this course is the understanding of precise layout of studs, sills, floor joist and ceiling members. The student will also learn how to layout partitions, door, and window openings. The student will perform all the layout mentioned above, and know the correct symbols and names of all wall, floor and ceiling components. The student will be introduced to the different methods used for framing buildings and floor framing with an emphasis on the platform, Balloon and post and beam framing method. The tools and materials used for this type of construction will be covered.

CNST-136. Roof Framing. 3 Hours (90 Contact Hours). Students will learn the different types of roofs used in residential and commercial construction. This course is the most demanding of the framing tasks. Unlike floor and wall construction that involve working with straight lines, roofs are sloped requiring the framer to understand and calculate precise angles. The student will learn the names of all the roof parts and how to calculate the angles to achieve a properly constructed roof.

CNST-159. Painting, Finishing, & Interior Design. 4 Hours (105 Contact Hours). This course focuses on the proper applications and techniques to apply paint, stain, and clear finishes that are commonly used in residential and commercial construction.

CNST-151. Windows, Doors & Stairs. 3 Hours (90 Contact Hours). This course will introduce the student to methods and procedures used in the selection and installation of residential windows, doors and stairs. Students will learn the proper components of windows and doors along with basic stair layout.

CNST-190. Survey & Elevations. 3 Hours (90 Contact Hours). Students will learn different survey methods and will enable the students to become familiar with surveying, site layout procedures and materials used in construction. Students will learn how to properly use builder’s lever, transit and laser levels.

CNST-210. Drywall, Insulation, & Ventilation. 4 Hours (105 Contact Hours). Students will learn to estimate and identify what type of drywall to use. Also included is how to install, finish, and texture drywall. Proper selection (R-U values) and installation methods are taught. Skills to help calculate proper sizing for ventilation purposes are also included.

CNST-207. On-the-Job Training (OJT or OJT Equivalent). 3 Hours (150 Contact Hours). Students demonstrating excellent attendance, attitude and mastery of core curriculum competencies may be considered for on-the-job training experience. Through the cooperation of local businesses, students are given the opportunity to apply the skills required for their future career. Class attendance is also required.

CNST-230. Exterior Construction. 5 Hours (140 Contact Hours). This course covers the stage of construction which completes the exterior of the building. The order of installation may be changed but the processes include roofing, housewrap, windows and doors, and siding. These processes typically are occurring at the same time as the trade groups are completing “rough” work in electrical, plumbing, and HVAC.

CNST-221. Cabinet Installation and Fabrication. 4 Hours (105 Contact Hours). The students are exposed to basic cabinet and countertop construction, installation and hardware.

CNST-180. Interior Construction. 4 Hours (105 Contact Hours). This course will cover the fundamentals of finish interior building construction. This is the final state of the construction process. Students will learn about specialized tools and techniques. This course will cover trimming and installing doors and windows and the appropriate decorative trim and hardware. They will also learn about cold formed steel framing and suspended ceilings.

CONT-150. Construction Applications. Up to 4 Hours (0-196 Contact Hours). Designed to provide practical hands-on applications of the Construction industry, this course provides students with an opportunity to gain knowledge and develop skills in the field. This is a short course focused on current Residential Construction applications.